Connector WF20K6ZG1 - six-pin sealed panel socket with direct cable outlet. It has a mounting diameter of 20 mm, connects a circuit with a current of 25A (4 contacts) and 5A (2 contacts) and voltage up to 500V, the wires are fastened by soldering.
The housing of this connector is sealed and dustproof, made of zinc chrome-plated alloy. Has protection - IP67
Pin diameter - 2.5 mm (4 pins) and 1.0 mm (2 pins). The connected wire can have a cross-section with a diameter ≤ 0.75 mm2 (AWG ≤ 18) and ≤ 4.00 mm2 (AWG ≤ 11).
Weipu WF20 series connectors can be used both indoors and outdoors.
| Dimensions and connector diagram of the WF ZG series panel straight connector on a flange with two holes and spring cap | ||
 | ||
| Quantity contacts | 6 | |
| ⌀d1 | 19.8 | |
| l | 10 | |
| L | 23 | |
| b | 35 | |
| B | 44 | |
| h | 36.5 | |
| ⌀d | 20.5 | |
| ⌀ | 4.5 | |
Characteristics of Weipu WF series connectors
| Explanation of Weipu-WF connector markings | ||||||||||
| WF | 20 | K | 6 | ZG | 1 | |||||
| WF | - Weipu connector series |
| 20 | - connector size (16; 20; 24; 28; 32; 48; 55) |
| K | - socket ( J - plug) |
| 6 | - number of contacts (2, 3, 4, 5, 6, 6B, 7, 8, 9, 12, 15) |
| ZG | - panel straight socket with fastening to the block with a nut on the front of the block |
| 1 | - fastening the wires to the contacts using soldering (2 - fastening the wires with screws; 3 - crimping) |
