Weipu SA810/S2 connector is a 2-pin cable socket designed for works with voltage 125 V and current load up to 5 A, has a mounting diameter of 8 mm.
The housing is made of anodized aluminum - anodizing creates a dense oxide layer on the aluminum surface that protects the connector from corrosion. The anodized layer is much harder than untreated aluminum, which increases resistance to mechanical damage, is lightweight and removes heat well.
Contact material – gold-plated brassfurther reduces resistance, providing a stable signal and minimal losses, the gold-plated layer protects brass from oxidation, which extends service life contacts.
Specially designed for use in conditions of high humidity, dust and vibration. The high degree of environmental protection IS67 makes these connectors ideal for outdoor use and harsh industrial environments.
Bayonet fixation mechanism - for interconnection, allows you to connect and disconnect connectors in a couple of seconds.
Protection against accidental disconnection – the mechanism is fixed by rotation and provides stable support even in vibration conditions.
The suitable part for the cable socket is the intercable plug SA811/P2 or panel fork SA812/P2.
| Characteristicsconnector SA8 | |||||
| Number of contacts | 2 | 3 | 4 | 6 | 8 |
| Contact diameter, mm | 1 | 1 | 0.6 | 0.6 | 0.6 |
| Nominal voltage | 5 | 5 | 3 | 3 | 3 |
| Operating voltage | 125 | 125 | 30 | 30 | 30 |
| Impulse voltage | 1000 | 1000 | 500 | 500 | 500 |
| Contact resistance | 5 mΩ | 5 mΩ | 10 mΩ | 10 mΩ | 10 mΩ |
| Insulation resistance | 2000 mΩ | 2000 mΩ | 2000 mΩ | 2000 mΩ | 2000 mΩ |
| Cable specification (mm/AWG) | ≤ 0.75/18 | ≤ 0.75/18 | ≤ 0.5/20 | ≤ 0.5/20 | ≤ 0.5/20 |
| Operating temperature | -40℃ ~ +85℃ | ||||
| Vibration | Frequency: 5-200Hz, amplitude - 5mm, speed 10 m/ c | ||||
| Fire resistance level | UL94-V0 | ||||
| Protection level | IP67 | ||||
| Scheme and size rrconnector SA8-10 |
|
