Weipu SA611/S4 connector – 4-pin inter-cable socket designed for work with voltage 30 V and current load up to 3 A, has a mounting diameter of 6 mm.
The body is made of anodized aluminum - anodizing creates a dense oxide layer on the aluminum surface , protecting the connector from corrosion. The anodized layer is much harder than untreated aluminum, which increases resistance to mechanical damage, is lightweight and removes heat well.
Contact material – brass with gilding, further reduces resistance, providing a stable signal and minimal loss, gold-plated layer protects brass from oxidation, which extends service life contacts.
Specially designed for use in conditions of high humidity, dust and vibration. The high degree of environmental protection IS67 makes these connectors ideal for outdoor use and harsh industrial environments.
Bayonet fixation mechanism - for interconnection, allows you to connect and disconnect connectors in a couple of seconds.
Protection against accidental disconnection – the mechanism is fixed by rotation and provides stable support even in vibration conditions.
Suitable part for the inter-cable socket - cable plug SA610/P4
| Specification connectors SA6 | ||||
| Number of pin | 2 | 3 | 4 | 5 |
| Diameter of contacts, mm | 0.6 | 0.6 | 0.6 | 0.6 |
| Rated current | 3 | 3 | 3 | 3 |
| Operating voltage | 30 | 30 | 30 | 30 |
| Impulse voltage | 500 | 500 | 500 | 500 |
| Contact resistance | 10 mΩ | 10 mΩ | 10 mΩ | 10 mΩ |
| Resistance to isolation | 2000 mΩ | 2000 mΩ | 2000 mΩ | 2000 mΩ |
| Cable specification (mm/AWG) | ≤ 0.5/20 | ≤ 0.5/20 | ≤ 0.5/20 | ≤ 0.5/20 |
| Body material | anodized aluminum | |||
| Contact material | brass with gilding | |||
| Operating temperature | -40℃ ~ +85℃ | |||
| Vibration | Frequency: 5-200 Hz, amplitude - 5 mm, speed 10 m/s | |||
| Fire resistance level | UL94-V0 | |||
| Degree of protection | IS67 | |||
| Scheme and size connectors SA6-11 |
|
