Weipu SA611/P4 connector – 4-pin inter-cable plug designed for work with voltage 30 V and current load up to 3 A, has a mounting diameter of 6 mm.
The body is made of anodized aluminum - anodizing creates a dense oxide layer on the aluminum surface , protecting the connector from corrosion. The anodized layer is much harder than untreated aluminum, which increases resistance to mechanical damage, is lightweight and removes heat well.
Contact material – brass with gilding, further reduces resistance, providing a stable signal and minimal loss, gold-plated layer protects brass from oxidation, which extends service life contacts.
Specially designed for use in conditions of high humidity, dust and vibration. With a high degree of environmental protection IP67 these connectors are ideal for outdoor use and harsh industrial environments.
Bayonet fixation mechanism - for interconnection, allows you to connect and disconnect connectors in a couple of seconds.
Protection against accidental disconnection – the mechanism is fixed by rotation and provides stable support even in vibration conditions.
Suitable part for inter-cable plug - cable socket SA610/S4
| Specification connectors SA6 | ||||
| Number of pin | 2 | 3 | 4 | 5 |
| Diameter of contacts, mm | 0.6 | 0.6 | 0.6 | 0.6 |
| Rated current | 3 | 3 | 3 | 3 |
| Operating voltage | 30 | 30 | 30 | 30 |
| Impulse voltage | 500 | 500 | 500 | 500 |
| Contact resistance | 10 mΩ | 10 mΩ | 10 mΩ | 10 mΩ |
| Resistance to isolation | 2000 mΩ | 2000 mΩ | 2000 mΩ | 2000 mΩ |
| Cable specification (mm/AWG) | ≤ 0.5/20 | ≤ 0.5/20 | ≤ 0.5/20 | ≤ 0.5/20 |
| Body material | anodized aluminum | |||
| Contact material | brass with gilding | |||
| Operating temperature | -40℃ ~ +85℃ | |||
| Vibration | Frequency: 5-200 Hz, amplitude - 5 mm, speed 10 m/s | |||
| Fire resistance level | UL94-V0 | |||
| Degree of protection | IP67 | |||
| Scheme and size connectors SA6-11 |
|
